Anping County Huihao Wire Mesh Manufacture Co., Ltd
Woven Wire Mesh of Various Materials! Support Processing and Customization! Real Source Factory and manufacturer ! Saving Money and Time for Customers!
Add to Cart
S32750 (F53/SAF2507) alloy is super duplex stainless steel made up of 250%Cr, 40% Mo and 7% Ni and N. This steel is mainly used in chemical, petrochemical and marine equipment which required special in tension and corrosion resistance.
S32750 is with strong ability to resist chloride corrosion, higher heat conductivity and lower thermal expansion corrosion. High chromium, molybdenum and nitrogen content makes it has strong ability to resist pitting corrosion, crevice corrosion and general corrosion. Compared with 2205, S32750 is with corrosion resistance ability suited to extreme corrosion environment. Its impact strength is high, but S32750 alloy is not suitable for environment with temperature higher than 299℃, then its toughness will be reduced.
| UNS S32750(SAF2507) Super Duplex Stainless Steel Wire Mesh | |||
| Mesh Count | Wire diameter(mm) | Aperture(mm) | Max width(m) |
| 10 | 0.60 | 1.94 | 1.60 |
| 20 | 0.40 | 0.87 | 1.60 |
| 30 | 0.30 | 0.55 | 1.60 |
| 40 | 0.23 | 0.40 | 1.60 |
| 50 | 0.20 | 0.31 | 1.60 |
| 60 | 0.15 | 0.27 | 1.60 |
| 70 | 0.12 | 0.24 | 1.60 |
| 80 | 0.13 | 0.19 | 1.60 |
| 90 | 0.12 | 0.16 | 1.60 |
| 100 | 0.10 | 0.15 | 1.60 |
| 120 | 0.09 | 0.12 | 1.60 |
| 150 | 0.063 | 0.11 | 1.60 |
| 180 | 0.053 | 0.01 | 1.60 |
| 200 | 0.053 | 0.07 | 1.60 |
Note: Special size and specifications can be made according to customers requires.
| STANDARD | WERKSTOFF NR. | UNS |
| Super duplex | 1.4410 | S32750 / S32760 |
| Grade | Density | Melting point | Yield strength(0.2% offset) | Tensile strength | Elongation |
|---|---|---|---|---|---|
| S32750/S32760 | 7.8g/cm3 | 1350°C(2460°F) | PSi-80000, MPa-550 | PSi-116000, MPa-800 | 15% |