Anping County Huihao Wire Mesh Manufacture Co., Ltd
Woven Wire Mesh of Various Materials! Support Processing and Customization! Real Source Factory and manufacturer ! Saving Money and Time for Customers!
Add to Cart
Material: stainless steel 304, 304l, 316, 316l
Wire diameter: 0.025mm
Mircon size: 25
Package type: spool
Stainless Steel Ultra Fine Wire are thin, strong, and resistant to corrosion. They are made from stainless steel, which is a combination of iron, chromium, nickel, and other elements. Therefore, these wires are tough and can resist rust and staining effectively.
Additionally, Stainless Steel Ultra Fine Wire are called fine wires because of their thin diameter. This unique feature makes them suitable for a variety of applications. For example, they are commonly used in industries like electronics.
| Name: | 0.025mm Ultra fine stainless steel wire – 304L |
| Grade: | AISI 304L |
| Size(mm): | 0.025mm |
| Size(inch): | 0.00098” inch |
| Size(micron): | 25 microns |
| Diameter tolerance: | ±0.001mm |
| Tensile Strength(N / mm2): | 686-980 |
| Elongation(%): | 20-30% |
| Weight(g): | 250-600g or customized |
| Weight(lb): | 0.55-1.32lb |
| Temper: | Annealed and Soft |
| Spool type: | Customized |
| Application: | Spinning, weaving , knitting and braiding |
| Package: | Spool+ stretch film+carton+pallet |
|
AISI Material |
Chemical composition (%) | |||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Cu | Ti | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.06 | ≤0.03 | 3.5~5.5 | 16~18 | - | - | - |
| 304 | <0.08 | <1.0 | <2.0 | <0.035 | <0.03 | 8~10 | 17~19 | - | - | - |
| 304L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 9~13 | 18~20 | - | - | - |
| 304HC | <0.06 | <1.0 | 1.2-1.8 | <0.035 | <0.03 | 8~11 | 17~19 | - | 2.0-3.0 | - |
| 316 | <0.08 | <1.0 | <2.0 | <0.04 | <0.03 | 10~14 | 16~18 | 2.0~3.0 | - | - |
| 316L | <0.03 | <1.0 | <2.0 | <0.04 | <0.03 | 12~15 | 16~18 | 2.0~3.0 | - | - |
| 310S | <0.08 | <1.5 | <2.0 | <0.04 | <0.03 | 19~22 | 24~26 | - | - | - |
| 321 | <0.08 | <1.0 | <2.0 | <0.045 | <0.03 | 9~13 | 17~19 | - | - | >0.035 |
| 301 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >7 | 16~18 | - | - | - |
| 302 | <0.15 | <1.0 | <2.0 | <0.04 | <0.03 | >8 | 17~19 | - | - | - |
| Wire diameter(mm) | Tolerance(mm) |
Maximum diameter deviation(mm) |
| 0.020-0.049 | +0.002 -0.001 | 0.001 |
| 0.050-0.074 | ±0.002 | 0.002 |
| 0.075-0.089 | ±0.002 | 0.002 |
| 0.090-0.109 | +0.003 -0.002 | 0.002 |
| 0.110-0.169 | ±0.003 | 0.003 |
| 0.170-0.184 | ±0.004 | 0.004 |
| 0.185-0.199 | ±0.004 | 0.004 |
| 0.-0.299 | ±0.005 | 0.005 |
| 0.300-0.310 | ±0.006 | 0.006 |
| 0.320-0.499 | ±0.006 | 0.006 |