
Add to Cart
Made with steel wire welded mesh fence.
PVC coated,popular width 6in,8in,12in, length 100ft.
This solar panel bird mesh designed specifically to keep birds and other wildlife from gaining access to the underside of Solar Panels.
This non-penetrating system is fast and easy to install. The black solar panel bird mesh is locked in place by our Solar Panel Clips.
1. Cut the PVC-coated weld mesh to an appropriate size for your solar panel
2. Use a piece of plywood to bend the mesh at a 45-degree angle so that it sits on the roof
3. Attach a clip to the solar panel
4. Place clips every 18 inches
5. Thread the clips through the weld wire mesh
6. Add a washer to the threaded clip
7. Slide washers down the threaded clip. but not all the way to the mesh
8. Once all washers are added, slide them up against the mesh to secure
9. Cut the excess portion of the threaded clips just past the washers to complete
Popular Specification For Solar Panel Mesh Solar Skirts | |
Wire Diameter/After PVC Coated Diameter | 0.7mm/1.0mm , 1.0mm/1.5mm , 1.0mm/1.6mm |
Mesh Opening | 1/2”X1/2” mesh, 1/2" x 1" mesh, 1" x 1" mesh |
Width | 4 inch , 6 inch , 8 inch , 10 inch |
Length | 100ft / 30.5m |
Material | Hot dipped galvanized wire electro galvanized wire |
Remark: Specification can be customized according to customers’ request |